Beagle Mac OS
The BeagleBone is a mini computer, in the size of a credit card. Very similar to a Raspberry Pi. A single-board computer is pretty much what it sounds like — all the hardware you would expect to. Beagle Bros was an American software company that specialized in creating personal computing products. Their primary focus was on the Apple II family of computers. Vegas winner casino. About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators.
I'm not sure if I'm the only one, but I had some issues getting the BeagleBone working on Lion today and wanted to share how I got things working (happy to report everything appears to be working correctly, including the RNDIS/Ethernet Gadget support!)
First I tried installing the FTDI_Ser.dmg installer from http://beagleboard.org/static/beaglebone/a3/Drivers/MacOSX/FTDI/FTDI_Ser.dmg
This did not work. I plugged the BeagleBone into my Macbook Pro and nothing showed up in /dev (although the mass storage driver was working out of the box).
There appears to be a couple things wrong with FTDI_Ser.dmg.
1. Why is FTDI_Ser.dmg 10MB? (see https://groups.google.com/d/msg/beagleboard/Kwadxf64VKk/uuI3db50D3EJ)
2. The Info.plist that gets installed by this installer (in /System/Library/Extensions/FTDIUSBSerialDriver.kext) includes an IOKitPersonality derived from the FT2232C entry, instead of the FT2232H that's installed on the BeagleBone (I'm not sure if this makes a difference or not..)
Here's what's installed by FTDI_Ser.dmg package from beagleboard.org:
<key>BeagleBone XDS100v2 JTAG</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>BeagleBone XDS100v2 Serial</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
Here's the entry for the FT2232H chip that's actually on the board (notice 'bcdDevice' device key is missing from the above entries):
<key>FT2232H_A</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>24592</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>FT2232H_B</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>24592</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
3. The FTDI_Ser.dmg package only includes a single kext, but the FTDIUSBSerialDriver_v2_2_16.dmg from the www.ftdichip.com includes two kexts (one for 32 bit and one for 64 bit?) The one included in the FTDI_Ser.dmg was the wrong one for my 64-bit Lion system.
---
So, I uninstalled the FTDI drivers from the FTDI_Ser.dmg and installed the latest drivers from http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_2_16.dmg
Then, I opened up /System/Library/Extensions/FTDIUSBSerialDriver.kext/Contents/Info.plist and added the following entry (based upon the FT2232H entries):
<key>BeagleBone XDS100v2 JTAG</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>BeagleBone XDS100v2 Serial</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
After rebooting, I plugged the BeagleBone into my Macbook Pro and I STILL didn't get any devices to show up in /dev. I have no idea why this doesn't work (any suggestions welcomed)
Finally, I installed the BONE_DRV.exe drivers from http://beagleboard.org/static/beaglebone/a3/Drivers/Windows/BONE_DRV.exe onto my Windows XP laptop. I plugged the BeagleBone into the laptop and it didn't recognize the FT2232H. After following the directions from this post https://groups.google.com/d/msg/beagleboard/FlFYX3XPbO4/XdiTtv5J2fcJ I was able to get Windows to recognize the FT2232H!!! YAY!!!
I used FT_PROG from http://www.ftdichip.com/Support/Utilities/FT_Prog_v2.4.2.zip to change the FTDI PID from 0xa6d0 to the default 0x6010 PID.
I plugged the BeagleBone back into my Macbook Pro and I got the following 2 devices in /dev:
$ ls /dev/tty.usbserial-001013FD
tty.usbserial-001013FDA tty.usbserial-001013FDB
I have no idea why modifying the Info.plist with the custom entries doesn't work.. but changing the PID back to 0x6010 gets things working.
To start actually talking to the device, I used minicom (sudo apt-get install minicom). After installing minicom, put the following into /opt/local/etc/minirc.beagleboard:
pu port /dev/tty.usbserial-<YOUR DEVICE SERIAL HERE>B
pu baudrate 115200
pu bits 8
pu parity N
pu stopbits 1
pu rtscts No
pu minit
pu mreset
pu mhangup
Then, run 'minicom beaglebone' to bring up the console.
I was also able to get RNDIS/Ethernet Gadget working. Make sure to eject 'BEAGLE_BONE' using the Finder window, and then wait a few seconds for the device to switch over to RNDIS/Ethernet Gadget. Then open up Network preferences and set IP Address: 192.168.7.1 and Subnet Mask: 255.255.255.0.
Open up a browser window on your Mac and visit 192.168.7.2 and you should see the default BeagleBone page.
First I tried installing the FTDI_Ser.dmg installer from http://beagleboard.org/static/beaglebone/a3/Drivers/MacOSX/FTDI/FTDI_Ser.dmg
This did not work. I plugged the BeagleBone into my Macbook Pro and nothing showed up in /dev (although the mass storage driver was working out of the box).
There appears to be a couple things wrong with FTDI_Ser.dmg.
1. Why is FTDI_Ser.dmg 10MB? (see https://groups.google.com/d/msg/beagleboard/Kwadxf64VKk/uuI3db50D3EJ)
2. The Info.plist that gets installed by this installer (in /System/Library/Extensions/FTDIUSBSerialDriver.kext) includes an IOKitPersonality derived from the FT2232C entry, instead of the FT2232H that's installed on the BeagleBone (I'm not sure if this makes a difference or not..)
Here's what's installed by FTDI_Ser.dmg package from beagleboard.org:
<key>BeagleBone XDS100v2 JTAG</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>BeagleBone XDS100v2 Serial</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
Here's the entry for the FT2232H chip that's actually on the board (notice 'bcdDevice' device key is missing from the above entries):
<key>FT2232H_A</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>24592</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>FT2232H_B</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>24592</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
3. The FTDI_Ser.dmg package only includes a single kext, but the FTDIUSBSerialDriver_v2_2_16.dmg from the www.ftdichip.com includes two kexts (one for 32 bit and one for 64 bit?) The one included in the FTDI_Ser.dmg was the wrong one for my 64-bit Lion system.
---
So, I uninstalled the FTDI drivers from the FTDI_Ser.dmg and installed the latest drivers from http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_2_16.dmg
Then, I opened up /System/Library/Extensions/FTDIUSBSerialDriver.kext/Contents/Info.plist and added the following entry (based upon the FT2232H entries):
<key>BeagleBone XDS100v2 JTAG</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>0</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
<key>BeagleBone XDS100v2 Serial</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.FTDI.driver.FTDIUSBSerialDriver</string>
<key>IOClass</key>
<string>FTDIUSBSerialDriver</string>
<key>IOProviderClass</key>
<string>IOUSBInterface</string>
<key>bConfigurationValue</key>
<integer>1</integer>
<key>bInterfaceNumber</key>
<integer>1</integer>
<key>bcdDevice</key>
<integer>1792</integer>
<key>idProduct</key>
<integer>42704</integer>
<key>idVendor</key>
<integer>1027</integer>
</dict>
After rebooting, I plugged the BeagleBone into my Macbook Pro and I STILL didn't get any devices to show up in /dev. I have no idea why this doesn't work (any suggestions welcomed)
Finally, I installed the BONE_DRV.exe drivers from http://beagleboard.org/static/beaglebone/a3/Drivers/Windows/BONE_DRV.exe onto my Windows XP laptop. I plugged the BeagleBone into the laptop and it didn't recognize the FT2232H. After following the directions from this post https://groups.google.com/d/msg/beagleboard/FlFYX3XPbO4/XdiTtv5J2fcJ I was able to get Windows to recognize the FT2232H!!! YAY!!!
I used FT_PROG from http://www.ftdichip.com/Support/Utilities/FT_Prog_v2.4.2.zip to change the FTDI PID from 0xa6d0 to the default 0x6010 PID.
I plugged the BeagleBone back into my Macbook Pro and I got the following 2 devices in /dev:
$ ls /dev/tty.usbserial-001013FD
tty.usbserial-001013FDA tty.usbserial-001013FDB
I have no idea why modifying the Info.plist with the custom entries doesn't work.. but changing the PID back to 0x6010 gets things working.
To start actually talking to the device, I used minicom (sudo apt-get install minicom). After installing minicom, put the following into /opt/local/etc/minirc.beagleboard:
pu port /dev/tty.usbserial-<YOUR DEVICE SERIAL HERE>B
pu baudrate 115200
pu bits 8
pu parity N
pu stopbits 1
pu rtscts No
pu minit
pu mreset
pu mhangup
Then, run 'minicom beaglebone' to bring up the console.
I was also able to get RNDIS/Ethernet Gadget working. Make sure to eject 'BEAGLE_BONE' using the Finder window, and then wait a few seconds for the device to switch over to RNDIS/Ethernet Gadget. Then open up Network preferences and set IP Address: 192.168.7.1 and Subnet Mask: 255.255.255.0.
Open up a browser window on your Mac and visit 192.168.7.2 and you should see the default BeagleBone page.
How to download and install BEAST on your computer.
Installing BEAST
BEAST has been developed in Java, which allows the same code to run on any platform that has the Java software installed. We have also created packages for each of the common operating systems to provide a user-interface that is ‘native’ and familiar. Jackpot casino online free.
Beagle Mac Os Download
On Mac
On Windows
On Linux, Unix or Mac OS X Command Line
Beagle Mac Os Catalina
Installing BEAGLE
BEAGLE is an independently developed software library that BEAST uses to accelerate its core calculations. Film editing software free download for mac. See here for more details about BEAGLE and installing it. Online slots to win real money.